Canon 1DxM2 – Field Test
The much awaited successor of the Canon 1Dx – the top end Canon camera for sports and wildlife photography – was announced and launched by Canon recently. Thanks to Canon India for giving me the opportunity to use the first sample unit of this new machine in the challenging field conditions of Indian forests. Having used the 1D predecessors like the Canon 1DM4 and Canon 1Dx extensively in the last 5 years, I was particularly intrigued to know more about the Canon 1DxM2 because for me Canon 1Dx was the complete camera and I wasn’t expecting an upgrade so soon.
Drawing a direct comparison between the Canon 1Dx and Canon 1DxM2, here are some broad level observations (please note that I tested the camera for still photography. The Canon 1DxM2 records 4K videos which is not covered in my field tests):
Muted Shutter Sounds
In comparison to the predecessors like the 1DM4 and the 1Dx the first thing you realise about the 1DxM2 is the relatively muted tone of the shutter. As per the tech specs an advanced mirror flapping system has been introduced which will probable and possibly reduce in-camera vibrations while firing bursts of 12-14 fps. Typically on a Canon 1Dx I tone done my fps to reduce in camera vibrations while firing a burst so that the probabilities of some images turning out to be tad soft goes down while shooting some fast action. I shot some fast Dhol action sequences in Pench National Park at 14fps in challenging low lights early morning and was pretty satisfied with the series in terms of image sharpness.

ISO 3200, f5.6, 1/500
Shot using a Canon 400mm f2.8 IS2 lens. A burst at 14 fps was fired for this series
Expanded Viewfinder Grid
The 61 point AF grid through the Canon 1DxM2 viewfinder looks a bit more expanded as compared to the Canon 1Dx. It essentially means that your in-camera composition is better.

Aided with the expanded AF point grid, here is an in-camera composition of cheetals grazing in morning light at Pench National Park
Low light performance
I pushed the Canon 1DxM2 ISO to a maximum of 3200 during some misty conditions at Dudhwa National Park and the noise was workable and can easily be removed using noise reduction tools.
View Finder Guiders
A feature which was introduced in the Canon 7DM2 has been pushed in the new Canon 1DxM2 as well. If you look through the view finder of this body, you can see some of your basic camera settings like White Balance, Metering Modes, AF Drive, Shooting Modes and a horizon stabilisation bar. The font colour is however black and the display works very well only when you are shooting with bright backgrounds.
Advanced AF for f8 lenses
Typically while using a Canon 1Dx with Canon 500mm or 600mm f4 lens and a 2x converter, only the centre focus points used to be active. A noted beneficial feature with the Canon 1DxM2 is that all 61 focus points remain active with f8 lenses (if you are using the new generation 1.4x and 2x converters). 41 of those points are cross-type, having both horizontal and vertical line sensitivity. 5 central points are dual cross-type and have wider baselines that offer high precision focusing for F2.8 and faster lenses.
Touch Screen
While shooting using the Live View feature you can now touch the LCD of the Canon 1DxM2 to focus your subject. The feature is good for shooting videos as well.

I mounted the camera on a beanbag and used the Live View AF touch screen feature to focus on the subject at the corner of the frame. Using Canon 1DxM2 and Canon 400mm f2.8 IS2
Feel free to share your thoughts in the comments section…